Pipes are manufactured as seamless cold-drawn, according to St 52 BK+S DIN 2391 standard, C quality.
5-stage telescopic cylinder.

Oil tank using ISO VG 46 hydraulic oil. Closed-circuit hydraulic system with pressure limitation, controlled by electrically operated valve.

Brake system compliant with ECE R13 Regulation, equipped with Roll Stability Support (RSS) system and 25-2M sensors.
30-type service brake chambers on the 1st axle.
Spring brake chambers with diaphragm-assisted 30x30 emergency brake chambers on the 2nd and 3rd axles.
Automatic slack adjuster system.
Electromagnetic compatibility compliant with ECE R10 Regulation (radio interference suppression).
Air suspension system supported by leaf springs and air bellows.
Shock absorbers preventing excessive axle movements.

Axle group with domestic drum brakes, tested and certified according to ECE R13.11 Regulation.
Each axle has a capacity of 3–12 tons.
Front axle is liftable.

2×7 pin socket compliant with ECE R48 Regulation.
24-volt lighting system; side lamps, stop lamps, license plate lamp and reverse lamp.
Reflective tape and license plate holder in accordance with Directive 103/2010.

Robust body structure welded and reinforced with high-strength steel profiles in accordance with Directive 1230/2012.
Floor plate: minimum 3 mm Hardox 450.
Side plates: minimum 3 mm Hardox 450.
Reinforcement profiles: 4 mm.
Rear door: minimum 3 mm Hardox 450, 1900 mm height, mechanical type, opening in two directions.
Inner corners of the rear door are reinforced with high-strength steel corner plates.

6 units of 385/65 R 22.5 tires.
11.75×22.5 rims.
Compliant with 92/23/EEC and 2005/11/EC standards.

Flexible and high-strength I-section chassis structure, formed by cutting and bending S700 quality steel plates, assembled using MAG gas-shielded welding and submerged arc welding methods.

After sandblasting to SA 2 1/2 quality, epoxy primer is applied followed by topcoat painting according to the requested RAL color codes.
(Average primer + paint thickness: 120 microns)

2-inch king pin compliant with ECE R55.01 Regulation.

1 steel tool box.
35-liter water tank.
Fire extinguisher box.
Reflector.
1 spare wheel carrier.
1 wheel chock and chock holder.
1 axle hub cap removal wrench.
Rear underrun protection bumper compliant with ECE R58 Regulation.
Side protection devices compliant with ECE R73 Regulation.
Mudguards compliant with Directive 109/2011.

Domestic support legs with 24-ton lifting capacity, two-speed operation, single-side manual control.