Type-approved axle group compliant with ECE R13.11 regulation, equipped with locally manufactured drum brakes.
Each axle has a capacity of 4×12 tons.
3rd and 4th axles are self-steering.

16+1 units of 235/70 R 17.5 tires.
Rims suitable for tire dimensions.
Compliant with 418/2011/EU standards.

Flexible and high-strength box-section telescopic extendable chassis, manufactured by cutting and bending S355 quality steel plates and joined using MAG gas-shielded welding.

Patterned steel/wood on wheel arches, flat steel plate in the center section, patterned steel on the sides.
Side areas equipped with steel strips and plates installed at specific intervals for climbing.

Brake system compliant with ECE R13.11 regulation.
Roll Stability Support (RSS), 4S-2M sensor configuration, EBS brake system.
Service brake chambers and spring-applied diaphragm-supported emergency brake chambers.
Automatic slack adjuster.
Electromagnetic compatibility compliant with ECE R10.04 regulation (radio interference suppression).
Air suspension system supported by leaf springs and air bellows.
Shock absorbers preventing excessive axle movements.

2×7 pin sockets compliant with ECE R48.05 regulation.
24-volt lighting system.
Side lamps, stop lamps, license plate lamp and reverse lamp.
Reflective markings and license plate holder compliant with 1003/2010/EU directive.
Rotating beacon lamp.

Locally manufactured support legs with 24-ton lifting capacity, two-speed, single-side operated.

2 hydraulically operated ramps, foldable, steel-plated surface, movable to the right and left.

2” and 3.5” king pins compliant with R55.01 regulation.

Load securing rings on both sides.
1 steel tool cabinet.
35-liter water tank.
EU standard reflectors.
Spare wheel carrier.
Fire extinguisher cabinet.
1 wheel chock and holder.
1 axle hub cap removal wrench.

After sandblasting to SA 2 1/2 quality, the surface is painted according to the requested RAL color codes.
(Average paint thickness: 120 microns)