Axle group certified according to ECE R13.11 regulation level, equipped with domestic drum brakes, each axle with a capacity of 3×9 tons.

4+1 units of 385/60 R 22.5 tires and suitable rims.
Compliant with 92/23/EEC and 2005/11/EC standards.

Flexible and durable I-section chassis manufactured by cutting and bending S355 quality steel plates, reinforced and assembled using MAG gas welding / submerged arc welding.

Robust body compliant with 97/27/EC and 2003/19/EC directives, supported by welded high-strength steel profiles.
Floor made of 2 mm steel sheet.
Sides made of high-strength steel.
Rear door with two-opening structure, small inspection windows, 1500 mm height.

Brake system compliant with ECE R13.11 regulation.
Electronic Braking System (EBS) with RSS stability control and 2S-2M sensors.
24-type service brake chamber on the 1st axle.
24×30 spring brake chambers with diaphragm support on the 2nd axle.
Automatic slack adjuster.
Electromagnetic compatibility compliant with ECE R10.03 (radio interference).
Mechanical equalizer leaf spring suspension system.

ECE R48.04 compliant electrical system.
2×7 pin sockets.
24V lighting system.
Side lamps, stop lamps, license plate lamp, reverse lamp.
Reflective markings and license plate holder compliant with 70/222/EEC directive.

Hydraulic pipes made of seamless cold-drawn steel.
5-stage telescopic cylinder compliant with ST52 BK+S DIN 2391 standard.
Limited hydraulic system controlled by electrically operated valve.

Manually hydraulic-controlled domestic landing legs with suitable lifting capacity, double-speed and single-side operation.

Ø50 mm towing pin compliant with ECE R55.01 regulation, drawbar with leaf spring suspension.

1 steel toolbox.
35-liter water tank.
Fire extinguisher box.
Reflectors.
1 spare wheel carrier.
1 wheel chock and holder.
1 axle cap removal wrench.
Rear underrun protection bumper compliant with ECE R58.02.
Side protection systems compliant with ECE R73.01.
Mudguards compliant with 91/226/EEC and 2010/19/EC directives.

Sandblasted to SA 2 1/2 quality, epoxy primed and painted according to requested RAL codes.
(Average primer + paint thickness: 120 microns)