Test-certified axle group compliant with ECE R13.11 regulation, equipped with locally manufactured drum brakes.
Each axle has a capacity of 4×12 tons.
1st and 4th axles are liftable.
4th axle is self-steering.

16+1 units of 245/70 R 19.5 tires.
Rims suitable for tire dimensions.
Compliant with 418/2011/EU standards.

Flexible and high-strength I-section chassis manufactured by cutting and bending S355 quality steel plates and joining them using MAG gas-shielded welding.

Patterned steel plate / wood on wheel arches.
Flat steel plate in the middle section.
Patterned steel plates on the sides.
Side areas reinforced with flat bars and steel plates installed at regular intervals to allow climbing.

Brake system compliant with ECE R13.11 regulation.
Roll Stability Support (RSS), 4S-2M sensor configuration, EBS brake system.
Service brake chambers and spring-applied diaphragm-supported emergency brake chambers.
Automatic slack adjuster.
Electromagnetic compatibility compliant with ECE R10.04 regulation (radio interference suppression).
Air suspension system supported by leaf springs and air bellows.
Shock absorbers preventing excessive axle movements.

2×7 pin sockets compliant with ECE R48.05 regulation.
24-volt lighting system.
Side lamps, stop lamps, license plate lamp and reverse lamp.
Rotating beacon.
Reflective markings and license plate holder compliant with 1003/2010/EU directive.

Locally manufactured support legs with 24-ton lifting capacity, two-speed, single-side operated.

2 hydraulic ramps, movable to the left and right, foldable, with steel-plated surface.

2” and 3.5” king pins compliant with R55.01 regulation.

Load securing rings on both sides.
1 steel tool box.
35-liter water tank.
EU-standard reflectors.
Spare wheel carrier.
Fire extinguisher cabinet.
1 wheel chock and holder.
1 axle cap removal wrench.

After sandblasting to SA 2 1/2 quality, the surface is painted according to requested RAL color codes.
(Average paint thickness: 120 microns)