Axle group certified in accordance with ECE R13.11 regulation, equipped with locally manufactured drum brakes.
Each axle has a capacity of 3×9 tons.
Liftable front axle.

6+1 units of 385/65 R 22.5 tires.
11.75×22.5 size rims.
Compliant with 92/23/EEC and 2005/11/EC standards.

Flexible and high-strength I-section chassis manufactured by cutting and bending S700 grade steel plates and joining them using MAG gas-shielded and submerged arc welding.

Superstructure compliant with 97/27/EC and 2003/19/EC directives.
Reinforced floor grids welded with high-strength steel profiles.
High-strength wooden floor.
Side panels made of 1 mm high-strength steel, 950 mm height.
Removable bottom-mounted stakes.
Rear: two-opening rear door with 950 mm height.

Brake system compliant with ECE R13.11 regulation.
Roll Stability Support (RSS), 2S-2M sensor configuration, EBS brake system.
30-type service brake chamber on the 1st axle.
Spring-applied diaphragm-supported 30×30 emergency brake chambers on the 2nd and 3rd axles.
Automatic slack adjuster.
Electromagnetic compatibility compliant with ECE R10.03 regulation (radio interference suppression).
Air suspension system supported by leaf springs and air bellows.
Shock absorbers preventing excessive axle movements.

2×7 pin sockets compliant with ECE R48.04 regulation.
24-volt lighting system including side lamps, stop lamps, license plate lamp and reverse lamp.
Reflective markings and license plate holder compliant with 70/222/EEC directive.

Locally manufactured support legs with 24-ton lifting capacity,
two-speed,
single-side operated.

2-inch king pin compliant with ECE R55.01 regulation.

1 steel toolbox.
35-liter water tank.
Fire extinguisher cabinet.
Reflector.
1 spare wheel carrier.
1 wheel chock and holder.
1 axle hub wrench.
Rear underrun protection bumper compliant with ECE R58.02 regulation.
Side protection devices compliant with ECE R73.01 regulation.
Mudguards compliant with 91/226/EEC and 2010/19/EC directives.

After sandblasting to SA 2 1/2 quality, epoxy primer and topcoat paint are applied according to requested RAL color codes.
(Average primer + paint thickness: 120 microns)