Axle group certified in compliance with ECE R13.11 regulation.
Locally manufactured drum brakes.
4-axle equalizing axle system, each axle with 4×18 tons capacity.

16+1 units of 12 R 22.5 tires.
Rims compatible with tire dimensions.
Compliant with 418/2011/EU standards.

Flexible and high-strength I-section chassis manufactured by
cutting and bending S355 quality steel plates and
joining them using MAG gas-shielded welding.

Patterned steel plate above wheel areas.
Flat steel plate in the center section.
Patterned steel plates on the sides.
Side areas covered with patterned steel plates suitable for climbing.

Brake system compliant with ECE R13.11 regulation.
Roll Stability Support (RSS), 4S-2M sensor configuration,
EBS braking system.
Service brake chambers and spring-applied diaphragm-supported emergency brake chambers.
Automatic slack adjuster.
Electromagnetic compatibility compliant with ECE R10.04 regulation (radio interference).
Equalized mechanical leaf spring suspension system.

2×7 pin sockets compliant with ECE R48.05 regulation.
24-volt lighting system.
Side lamps, stop lamps, license plate lamp and reverse lamp.
Reflective markings and license plate holder compliant with 1003/2010/EU directive.
Rotating beacon lamp.

Hydraulically operated hydraulic support legs.

Steel-plated gooseneck with hydraulic operation,
suitable for loading at low approach angles.

2” and 3.5” king pins compliant with R55.01 regulation.

Load securing rings on both sides.
1 steel tool box.
35-liter water tank.
EU standard reflectors.
Spare wheel carrier.
Fire extinguisher cabinet.
1 wheel chock and holder.
1 axle cap removal wrench.

After sandblasting to SA 2 1/2 quality,
surface is painted according to requested RAL color codes
with an average paint thickness of 120 microns.