Seamless cold-drawn pipes manufactured according to St 52 BK+S DIN 2391 standard.
C-type, 5-stage telescopic hydraulic cylinder.
Hydraulic oil tank with ISO VG 46 oil.
Restricted closed-circuit hydraulic system controlled by electrically operated valve.
Hydraulic installation available.

Brake system compliant with ECE R13.11 regulation, equipped with Roll Stability Support (RSS), 2S-2M sensors and EBS brake system.
30-type service brake chamber on the 1st axle.
Spring-applied diaphragm-supported 30×30 emergency brake chambers on the 2nd and 3rd axles.
Automatic slack adjuster.
Electromagnetic compatibility compliant with ECE R10.03 regulation (radio interference).
Air suspension system supported by leaf springs and air bellows.
Shock absorbers preventing excessive axle movements.

Test-certified axle group compliant with ECE R13.11 regulation.
Locally manufactured drum brakes.
Each axle has a capacity of 3–9 tons.
Liftable front axle.

2×7 pin sockets compliant with ECE R48.04 regulation.
24-volt lighting system including side lamps, stop lamps, license plate lamp and reverse lamp.
Reflective markings and license plate holder compliant with 70/222/EEC directive.

Body compliant with 97/27/EC and 2003/19/EC directives.
Reinforced structure welded with high-strength steel profiles.
Floor plate: 2 mm.
Side plates: 1 mm.
Reinforcements: 1 mm high-strength steel.
Reinforcements are hinged; hinged side is double-pinned.
Bottom-mounted removable locking lugs.
Rear door with a height of 1450 mm, double-opening type with a small inspection window.

6 units of 385/65 R 22.5 tires.
11.75×22.5 rims.
Compliant with 92/23/EEC and 2005/11/EC standards.

Flexible and high-strength I-section chassis manufactured by cutting and bending S700 grade steel plates and joining them using MAG gas-shielded and submerged arc welding methods.

After sandblasting to SA 2 1/2 quality, epoxy primer and topcoat paint are applied according to requested RAL color codes.
(Average primer + paint thickness: 120 microns)

2-inch king pin compliant with ECE R55.01 regulation.

1 steel toolbox.
35-liter water tank.
Fire extinguisher cabinet.
Reflector.
1 spare wheel carrier.
1 wheel chock and holder.
Rear underrun protection bumper compliant with ECE R58.02 regulation.
Side protection devices compliant with ECE R73.01 regulation.
Mudguards compliant with 91/226/EEC and 2010/19/EC directives.

Locally manufactured support legs with 24-ton lifting capacity, two-speed, single-side operated.