Seamless pipes manufactured according to St 52 BK+S DIN 2391 C standard, 5-stage telescopic cylinder.
Hydraulic oil tank compatible with the system.
Restricted closed-circuit hydraulic system controlled by electrically operated valve.
245×5×5750 C-type lift with cap.
150-liter hydraulic oil tank.

Air / laminated leaf spring suspension system supported by leaf springs and air bellows, dual-line brake system.
30-type service brake chambers on the 1st and 2nd axles.
Spring-applied diaphragm-supported 30×30 emergency brake chambers on the 3rd axle.
Laminated leaf spring with 14 layers.
Without ABS (ABS-ready).

27-pin socket compliant with ECE R48.04 regulation.
24-volt lighting system including side lamps, stop lamps, and license plate lamp.

Locally manufactured modular-type axles with drum brakes, each with 16-ton capacity.
Liftable front axle with air suspension.
2nd and 3rd axles equipped with laminated leaf spring suspension.

12+1 units of 315/80 R 22.5 tires.
9.00×22.5 rims.

Body reinforced with welded profiles made of high-strength steel.
Floor thickness: 6 mm.
Side walls: 4 mm.
Rear body suitable for material unloading.
Rear door single-side opening with inspection window.

I-section chassis manufactured by cutting and bending S355 quality steel plates, reinforced for strength and joined by gas-shielded welding.
Chassis thickness: 14 mm.
Additional support brackets will be installed.

After sandblasting to Sa 2 1/2 quality, the surface is painted according to requested RAL codes with an average paint thickness of 120 microns.

2-inch king pin compliant with DIN 74080 / ISO 337 standard.
2 king pin positions available.

2 steel toolboxes.
35-liter water tank.
Fire extinguisher cabinet.
Reflector.
1 spare wheel carrier.
1 wheel chock and holder.
1 axle cap removal wrench.
2 dust covers.
Semi-circular plastic mudguards.

Locally manufactured support legs with 24-ton lifting capacity, two-speed, single-side operated.