Axle group certified according to ECE R13.11 regulation, equipped with domestic drum brakes, each axle with a capacity of 3×9 tons.

6+1 units of 385/65 R22.5 tires and suitable size rims.
Compliant with 92/23/EEC and 2005/11/EC standards.

Flexible and durable I-section chassis manufactured by cutting and bending S355 quality steel plates and joining them with MAG gas shielded welding.

Tipping silo tank compliant with 97/27/EC and 2003/19/EC directives.
High-strength tank reinforced with welded steel profiles.
Tank body thickness: 4 mm, dished ends: 4 mm.
3 or 4 manhole covers with safety walking platform on top.

Braking system compliant with ECE R13.11 regulation.
EBS braking system.
30” service brake chamber on the 1st axle.
30×30 spring brake chambers with diaphragm support on 2nd and 3rd axles.
Automatic slack adjuster.
Leaf spring suspension system.

2×7 pin sockets compliant with ECE R48.04 regulation.
24V lighting system.
Side lamps, brake lamps, license plate lamp, reverse lamp.
Reflective markings and license plate holder compliant with 70/222/EEC directive.

Domestic landing legs with 24-ton lifting capacity, two-speed, single-side operated.

2” King pin compliant with ECE R55.01 regulation.

1 steel toolbox.
35 L water tank.
Fire extinguisher box.
Reflectors.
1 spare wheel carrier.
1 wheel chock and holder.
1 axle cap removal wrench.
Rear underrun protection compliant with ECE R58.02.
Side protection systems compliant with ECE R73.01.
Suitable mudguards.

After SA 2½ sandblasting, epoxy primer is applied, followed by final coating in desired RAL colors.
(Average primer + paint thickness: 120 microns)