ECE R13.11 certified axle group with domestic drum brakes, each axle with 3×12 tons capacity, lifting front axle.

12+1 units of 12 R 22.5 tires and 9.00×22.5 rims.
Compliant with 92/23/EEC and 2005/11/EC standards.

Flexible and high-strength bolted I-section chassis manufactured by cutting and bending ST52 quality steel plates and joined by MAG gas shielded welding / submerged arc welding.

Tanker body compliant with 97/27/EC and 2003/19/EC directives.
Tank body manufactured from 4 mm thick high-strength ST52 steel.
Tank mounted to the chassis with bolted steel-reinforced rings.
2 aluminum manhole covers resistant up to 110 kPa pressure.
Single compartment tank, fabric hose, safety valve (2.5 bar), ventilation pipes and valves for fast discharge, ladder.

Dual-line pneumatic brake system.

ECE R48.04 compliant 2×7 pin sockets.
24V lighting system.
Side lamps, stop lamps, license plate lamp, reverse lamp.
Reflective strips and license plate holder compliant with 70/222/EEC directive.

Domestic support legs with 24 tons lifting capacity, dual-speed, single-side operated.

2” King pin compliant with ECE R55.01 regulation.

1 steel toolbox.
35-liter water tank.
Fire extinguisher box.
Reflectors.
1 spare wheel carrier.
1 wheel chock and holder.
1 axle hub cap removal wrench.
Rear underrun protection bumper compliant with ECE R58.02.
Side protection systems compliant with ECE R73.01.
Mudguards compliant with 91/226/EEC and 2010/19/EC.

After SA 2 1/2 sandblasting, epoxy primer coating and final painting according to desired RAL codes.
(Average primer + paint thickness: 120 microns)